Abstract
Life cycle assessment (LCA) is a useful tool for quantifying the overall environmental impacts of a product, process, or service. The scientific scope and boundary definition are important to ensure the accuracy of LCA results. Defining the boundary in LCA is difficult and there are no commonly accepted scientific methods yet. The objective of this research is to present a comprehensive discussion of system boundaries in LCA and to develop an appropriate boundary delimitation method.A product system is partitioned into the primary system and interrelated subsystems. The hierarchical relationship of flow and process is clarified by introducing flow- and process-related interventions. A system boundary curve model of the LCA is developed and the threshold rules for judging whether the system boundary satisfies the research requirement are proposed. Quantitative criteria from environmental, technical, geographical and temporal dimensions are presented to limit the boundaries of LCA. An algorithm is developed to identify an appropriate boundary by searching the process tree and evaluating the environmental impact contribution of each process while it is added into the studied system.The difference between a limited system and a theoretically complete system is presented. A case study is conducted on a color TV set to demonstrate and validate the method of boundary identification. The results showed that the overall environmental impact indicator exhibits a slow growth after a certain number of processes considered, and the gradient of the fitting curve trends to zero gradually. According to the threshold rules, a relatively accurate system boundary could be obtained.It is found from this research that the system boundary curve describes the growth of life cycle impact assessment (LCIA) results as processes are added. The two threshold rules and identification methods presented can be used to identify system boundary of LCA. The case study demonstrated that the methodology presented in this paper is an effective tool for the boundary identification.
Info
Journal Article, 2014
UN SDG Classification
DK Main Research Area
Science/Technology
