include <Wire.h>
include <RTClib.h>
include <Adafruit_Sensor.h>
include “Adafruit_BME680.h”
include <PCD8544.h>
// LCD
static PCD8544 lcd;
// Pump
define RELAY 12
// Vent
define VENT 9
Adafruit_BME680 bme; // I2C
// Moisture sensor
define START 2
define MEASURE A0
int sensorValue = 0;
//LED
define LED 8
//Tid
RTC_DS1307 RTC;
DateTime now;
void Tid() {
now = RTC.now();
Serial.print(now.year(), DEC);
Serial.print(‘/’);
Serial.print(now.month(), DEC);
Serial.print(‘/’);
Serial.print(now.day(), DEC);
Serial.print(‘ ‘);
Serial.print(now.hour(), DEC);
Serial.print(‘:’);
Serial.print(now.minute(), DEC);
Serial.print(‘:’);
Serial.print(now.second(), DEC);
Serial.println();
delay(1000);
}
void setup() {
Serial.begin(115200);
Wire.begin();
RTC.begin();
// Moisture
pinMode(START, OUTPUT);
// LCD
lcd.begin(84, 48);
// Pumpe
pinMode(RELAY, OUTPUT);
// Vent
pinMode(VENT, OUTPUT);
//LED
pinMode(LED, OUTPUT);
// Tid
RTC.adjust(DateTime(DATE, TIME));
Vand();
}
void loop() {
// Temp & Hum
!bme.begin();
bme.beginReading();
delay (5000);
bme.endReading();
Tid();
if (now.hour() > 7 && now.hour() < 20 && now.minute() > 58) {
Vand();
}
// Pumpe
if (sensorValue < 100) {
Pump();
// Lad vandet synke ned
delay(10000);
// Mål igen
Vand();
}
// Vent
if (bme.temperature > 22) {
digitalWrite(VENT, HIGH);
} else {
digitalWrite(VENT, LOW);
}
//LED
if (now.hour()>7 && now.hour()<20) {
digitalWrite(LED, HIGH);
} else {
digitalWrite(LED, LOW);
}
LCD1();
LCD2();
LCD3();
LCD4();
}
void Vand() {
digitalWrite(START, HIGH);
delay(500);
sensorValue = analogRead(MEASURE);
delay(5000);
digitalWrite(START, LOW);
}
void Pump() {
digitalWrite(RELAY, HIGH);
delay(10000);
digitalWrite(RELAY, LOW);
}
void LCD1() {
lcd.setCursor(0, 0);
lcd.print(F(“LT = “));
lcd.print(bme.temperature);
lcd.println(F(” C”));
Serial.print(F(“LT = “));
Serial.print(bme.temperature);
Serial.println(F(” C”));
}
void LCD2() {
lcd.setCursor(0, 1);
lcd.print(F(“LF = “));
lcd.print(bme.humidity);
lcd.println(F(“%”));
Serial.print(F(“LF = “));
Serial.print(bme.humidity);
Serial.println(F(“%”));
}
void LCD3() {
lcd.setCursor(0, 2);
lcd.print(“VN = ” );
lcd.println(sensorValue);
Serial.print(“VN = ” );
Serial.println(sensorValue);
}
void LCD4() {
Tid();
// Plotting af tid
lcd.setCursor(0, 3);
lcd.print(“TID = ” );
lcd.print(now.hour(), DEC);
lcd.print(‘.’);
lcd.print(now.minute(), DEC);
lcd.print(‘.’);
lcd.print(now.second(), DEC);
lcd.println();
}
